Dispersion adhesivesUse the ecological and economical smart alternative

Water-based adhesives show impressive resistance to water, heat and high temperatures. With their high performance capabilities, they are used not only for profile wrapping, edge finishing, surface lamination but also for 3D hot lamination and bonding. In other words, dispersion adhesives are used for all fields of expertise that we, at IMAWELL, equip with professional solutions. They thus provide an environmentally-friendly alternative to solvent adhesives, since they are not flammable and do not release solvents.

The unfilled dispersion adhesive corresponds to the classification of thermal wood adhesives according to the water resistance (DIN EN 204) D2. It is ideally suited for surface lamination with finish film.

Base PVAc
Properties The unfilled D-2 dispersion
Very good bonding properties
Fast setting
Versatile application
Application Furniture, Interior doors, Board-on-Frame (BoF) / Board-on-Stripes (BoS)
Uses surface lamination
Coating material Finish Foli
Core material MDF, chipboard, solid wood

The unfilled dispersion adhesive corresponds to the classification of thermal wood adhesives according to the water resistance (DIN EN 204) D2. As demonstrated by experiments and experience, the product is versatile in its versatility due to its very good bonding properties: profile sheathing, thermal laminating as well as body and assembly gluing. Also provides very good adhesion between frame as well as paper honeycomb to MDF and thin plate.

Base PVAc
Properties The unfilled D-2 dispersion
Versatile application
Very good bonding properties
BoF and BoS designs provide good adhesion between frames as well as paper honeycomb to MDF and thinboard panels
Fast setting
Application Furniture, interior doors, Board-on-Frame (BoF) / Board-on-Stripes (BoS)
Uses Profile wrapping, surface laminating, edge banding, bonding, carcass and assembly gluing
Coating material Finish Foli, CPL, veneer
Core material MDF, wood veneer, chipboard

The filler-free, fast-bonding dispersion adhesive, novima.dis 603 (durability grading D3 according to DIN EN 204) for waterproof bonding, is ideally suited for use on furniture, wall and ceiling panels, floorings.

Base PVAc
Properties Single component, D3 adhesive
Filler-free
Highly elastic
Good melting behaviour
Fast bonding
Glued joints highly resistant to water and hardness
Application Furniture, interior doors, wall and ceiling panels, window parts, floor covering, Board-on-Frame (BoF) / Board-on-Stripes (BoS)
Uses Profile wrapping, surface lamination, 3D hot lamination, edge banding, bonding, carcass and assembly gluing
Coating material PP, CPL / HPL, veneer, finish foil / paper, ABS edge, melamine edge
Core material MDF, chipboard, solid wood

For furniture, wall and ceiling panels, floor coverings: This highly elastic D3 adhesive is predestined for the hot laminating of decorative finish foils and veneer gluing. It is also well proven for surface bonding of CPL/HPL in short-cycle presses and for carcase and assembly bonding with PVC foils.

Base PVAc
Properties Single component, D3 adhesive
Highly elastic
Good melting behaviour
Very strong and rapid bonding
High resistance to heat and water
Good moisture-resistance
Hard glue joints
Application Furniture, wall and ceiling panels, floor covering
Uses Surface lamination, 3D hot lamination, edge banding, bonding
Coating material CPL / HPL, veneer, finish foil / paper, PVC, ABS edge, melamine edge
Core material MDF, chipboard

In addition to the wrapping of drawer frames with PVC foil, the EVA foil adhesive, novima.dis 696, is particularly suitable for surface lamination with finish foils, PP and PVC on wood material and plasterboard panels.

Base EVA
Properties Medium viscosity foil adhesive
Good adhesion properties
Suitable for all usual applicator systems
High initial strength, even with low coating weights
Application Furniture, interior doors and finish, Board-on-Frame (BoF) / Board-on-Stripes (BoS), window parts
Uses Profile wrapping, hot lamination
Coating material PP, finish foil, PVC
Core material MDF, wood veneer, chipboard

For the wrapping of drawer frames and work on wall and ceiling panels this medium viscosity foil adhesive does all the work – especially for the surface bonding of PVC foils and other decorative foils to MDF, chipboard or plasterboard.

Base EVA
Properties Medium viscosity foil adhesive
Excellent adhesion to thermoplastic foils
High initial strength, even with low coating weights
Suitable for all usual applicator systems
Application Furniture, wall and ceiling panels, drawer frames
Uses Profile wrapping, surface lamination
Coating material PP, finish foil / paper, PVC
Core material MDF, plasterboard, wood veneer, chipboard